Latest news
TutorialsBlender

How to Distribute Objects on Surfaces with Blender Geometry Nodes

We walk through distributing points across surfaces in Blender Geometry Nodes and placing object instances on them. The guide covers density and spacing controls, as well as the automatically generated stable ID.

Photorealistic architectural visualization of a curved courtyard surface with evenly spaced plantsAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. Distribute Points on Faces creates points on surfaces and requires the input geometry to be a mesh with faces.
  2. Random distribution is fast; Poisson Disk takes the minimum distance between points into account.
  3. Instance on Points adds geometry references to points, reusing the same geometry without repeatedly copying the underlying data.
  4. Distribute Points on Faces provides Normal and Rotation outputs for each point, along with an automatically generated stable ID.

What you’ll learn in this guide

With Blender Geometry Nodes, you can distribute points across a mesh surface and place object instances on them. In this guide, you’ll learn how to set up a basic distribution system using the Distribute Points on Faces and Instance on Points nodes, then experiment with density, minimum distance, randomness, and orientation settings.

This approach can be useful in design scenarios such as placing plants in a landscape, repeating elements on a façade, or adding recurring decorative objects to an interior. These examples illustrate possible uses; the nodes’ core function is to create points on a surface and attach geometry instances to them.

Requirements

The provided Blender Manual pages do not specify a particular Blender version or account requirements. Rather than assume a version number, check whether the Blender installation you’re using includes the Distribute Points on Faces and Instance on Points nodes in Geometry Nodes. You can also use the Normal node to inspect orientation separately.

The input geometry you distribute points on must be a mesh with faces. Have the geometry you want to instance ready as well. Instance on Points works with geometry types that have a Point domain, including meshes, point clouds, and curve control points. However, the mesh-with-faces requirement cited above applies to Distribute Points on Faces.

Distributing objects on a surface, step by step

1. Connect the surface geometry to the distribution node

Add a Distribute Points on Faces node in the Geometry Nodes editor and connect the surface mesh to its Mesh input. The node outputs the points it creates across the surface from its Points output. If you don’t get the expected result, first check that the input geometry actually contains faces.

The node’s Selection input determines which face corners are considered during distribution. Adjust this selection when you need to limit the distribution area.

2. Choose a distribution method

The Distribution Method property offers Random and Poisson Disk options. Random places points across the surface and is described in the documentation as the faster of the two methods. If you want to limit how close points can get to one another, try Poisson Disk, which enforces a minimum distance between them.

Think of Distance Min in Poisson Disk as a spacing control. When its value is zero, no additional threshold is applied to separate points during distribution, so in this respect the result approaches Random behavior. As you increase the distance, the number of points that can fit on the surface may also be limited. For this reason, you shouldn’t expect both very high density and wide spacing at the same time.

3. Adjust density and randomness

Density specifies the number of points to distribute per square meter of face. Its value is multiplied by the information supplied through the Density Attribute input. With the Poisson Disk method, Density Max also comes into play: this input defines the maximum density per square meter and is available only with this distribution method.

Keep in mind how Distance Min and Density Max work together. If the requested density exceeds the number of points that can fit on the surface at the selected minimum spacing, the node will stop generating points. In that case, review the minimum distance and density settings together rather than simply increasing Density.

Seed changes the random point placement. Change Seed to try a different distribution on the same surface at the same density. This lets you compare different layouts while keeping other values, such as spacing and density, fixed.

4. Add geometry instances to the points

Connect the points output from Distribute Points on Faces to the Instance on Points node. Connect the geometry you want to instance to its Instance input. Rather than creating a new copy of the geometry’s data at every selected point, this node reuses it by creating references. You can also use the Selection input to control which points receive instances.

When working with geometry that contains multiple instances, you can use the Pick Instances option. When enabled, the node selects the instance specified by Instance Index for each point instead of placing all the geometry there. The documentation describes this option for use with the Collection Info node. If Instance Index points to a position that doesn’t exist in the list, the index wraps around from the beginning or end of the list.

5. Adjust orientation and scale

The Normal output of Distribute Points on Faces gives the normal direction of the triangles on which the points lie. Its Rotation output is an Euler rotation derived from that normal. You can connect this output to the Rotation input of Instance on Points and set the size of the instances with its Scale input.

Because the normal doesn’t define all three axes of the rotation, the Z axis in the Rotation output does not represent a fixed direction. If you need to align a specific axis precisely, inspect the result in the scene. The Normal node can also be used to read the normal direction of geometry elements; on meshes, its True Normal output returns normal values that do not account for custom normals.

Distribute Points on Faces also generates a stable ID for the points and stores it in the built-in id attribute. This is not a user-configurable option; it’s data generated by the node. It helps keep the identities of remaining points consistent when the geometry is deformed or the distribution density changes. Nodes such as Random Value and Instance on Points can use this information.

Common mistakes

  • Trying to distribute points on geometry without faces: Distribute Points on Faces expects a mesh with faces. Check the input geometry first.

  • Increasing density without accounting for minimum spacing: With Poisson Disk, Distance Min can limit the number of points that fit on the surface. If you can’t reach the desired density, review both values together.

  • Assuming the Rotation output defines every axis: The Z axis of the rotation derived from the normal can be arbitrary. Visually check the orientation of the instances.

  • Treating instances as independent objects: Instance on Points initially creates geometry references. If you need to convert them into objects, you can use the Make Instances Real operator.

Uses in architectural and visualization workflows

This method can help architects, interior designers, students, and visualization artists who want to change the number or placement of repeated elements during design. You can try different distribution options for plants, façade components, or similar decorative elements within a single node setup. The choice between Random and Poisson Disk affects how freely or evenly spaced the elements are placed.

That said, the documentation covered in this guide does not provide hardware requirements, performance benchmarks, specific licensing conditions, or a version compatibility table. It would therefore be inaccurate to assume speed or cost benefits for a large scene. Confirm that the nodes are available in your Blender installation, and test density, minimum distance, and orientation at the scale of your project. The workflow uses instancing to manage repeated geometry; additional steps may be needed when instances must be converted into real objects.

Next steps

Start by comparing the two distribution methods on a small mesh. Then change Seed to try new placements; next, explore how Distance Min in Poisson Disk affects the gaps between points and their total number. After connecting points to the instance geometry, check the Normal and Rotation outputs. Finally, test instance selection with different Instance Index values and size changes through the Scale input.

Sources and license

This guide has been adapted into Turkish from the “Distribute Points on Faces,” “Instance on Points Node,” and “Normal Node” pages in the Blender Manual. All three sources are licensed under CC BY-SA 4.0.

Sources

3 sources
D(
docs.blender.org (CC BY-SA 4.0)docs.blender.org/manual/en/latest/modeling/geometry_nodes/point/distribute_points_on_faces.html
Summary
D(
docs.blender.org (CC BY-SA 4.0)docs.blender.org/manual/en/latest/modeling/geometry_nodes/instances/instance_on_points.html
Summary
D(
docs.blender.org (CC BY-SA 4.0)docs.blender.org/manual/en/latest/modeling/geometry_nodes/geometry/read/normal.html
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For offices and students placing repeated elements on surfaces, this node setup offers a way to compare different layouts without duplicating them by hand. Trying density and spacing together can be especially helpful when evaluating design options for plants, façade components, and similar elements.

Before putting this into practice, teams in Turkey should verify which nodes are available in their Blender installation and how instances will be handled in the project. The sources do not specify hardware requirements, performance gains, or licensing conditions, so it’s better to test with an actual project file than to assume benefits in large scenes.

Frequently asked questions

Which Geometry Nodes are used to distribute objects on a surface in Blender?

Distribute Points on Faces creates points across the surface, and Instance on Points adds geometry instances to those points. The input to the distribution node must be a mesh with faces.

What’s the difference between Poisson Disk and Random distribution?

Random distributes points randomly and is, according to the documentation, the faster method. Poisson Disk takes the minimum distance between points into account.

Does Distribute Points on Faces generate a stable ID?

Yes. The node generates a stable ID for the points and stores it in the built-in id attribute. This identity helps maintain consistency for remaining points when the geometry changes.

Comments and the forum are in Turkish.Join the discussion
+

Related news