Latest news
Tips & GuidesArchicad

Graphic Override Rules in Archicad 29: A guide to creating rules

Archicad 29’s Graphic Override Rules tools let you select elements by criteria and change their line, fill, and surface appearance. This guide explains how to create and edit rules.

Architectural study model distinguishing existing, demolished, and new elements in a renovation projectAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. Open the rules from Document > Graphic Overrides > Graphic Override Rules.
  2. Each rule can be limited by element type and additional criteria.
  3. Set line, fill, and surface appearance in the Override Style section.
  4. Criteria for the first three rules, corresponding to Existing, To be Demolished, and New renovation statuses, cannot be edited.

Graphisoft’s Archicad 29 help documentation describes Graphic Override Rules as a tool for defining and editing visual rules for model elements based on criteria. Open it from Document › Graphic Overrides › Graphic Override Rules. You can also start managing rules from the relevant links in the Graphic Override Combinations or Renovation Filter Options dialogs. The steps below follow the workflow described in the Archicad 29 documentation.

1. Open the rules dialog and organize your rules

  1. Go to Document › Graphic Overrides › Graphic Override Rules in the menu. You can also manage rules using the Manage Rules button in the Graphic Override Combinations dialog or the Graphic Override Rules link in the Renovation Filter Options dialog.

  2. Select a rule from the list on the left side of the dialog. The selected rule’s Criteria and Override Style panels appear on the right. Icons in the list show the line and fill types, foreground and background pens, and, if applicable, surface defined by each rule.

  3. To add a rule, use the New button at the bottom of the dialog or the context menu for a rule or rule group. In the following steps, you’ll specify which elements the rule applies to and what it changes in their appearance.

  4. As your rules grow in number, use New Group to organize them. Drag and drop rules between groups, and use the search field to find rule or group names.

This organization can make it easier to find rules created for different purposes. The documentation does not explain the order in which rules are applied or how groups prioritize the resulting appearance, so don’t treat the group structure as an application order.

2. Define the target elements with Criteria

  1. The first row in a rule’s Criteria panel is always Element Type. Select the row and click the black arrow at its end to choose the element type or types the rule will apply to.

  2. To make a more detailed selection, click Add.... In the Parameters & Properties list that opens, select one or more criteria; use the search field to find the parameter you need. Add your selection to the list with the Add button or the Enter key.

  3. Choose additional criteria based on the element types defined in the list. Note that the available criteria change depending on the elements selected in the previous rows.

These criteria define which elements the override affects. There are some limitations: sub-elements such as Curtain Wall Panel and Morph faces are not available in the Element Type list. IFC Properties also cannot be used in these rules’ criteria. Choosing a layer or layer combination as a criterion also means that only elements visible in that layer combination are affected; don’t assume that selecting a layer name alone will unconditionally affect all elements.

3. Choose the visual changes with Override Style

In the Override Style panel, check the boxes for the properties you want to change. For the fill options Fill Type, Fill Pen, and Fill Background Pen, you can specify whether the change applies to Drafting Fill, Cover Fill, or Cut Fill. You can select more than one category. Set the color by pen number or with the color picker.

For Surface, you can target cut surfaces (Cut Surfaces), uncut surfaces (Uncut Surfaces), or both. The icons you select determine which surfaces the rule covers. The source documentation does not recommend a specific color, pen number, or fill type, so it would be inappropriate to prescribe project-specific values here.

SettingSuggested valueEffect
Element TypeThe element type targeted by the ruleDefines which elements the rule applies to.
Additional criteriaParameters & Properties appropriate to your needsNarrows the selection using more specific conditions.
Fill categoryDrafting Fill, Cover Fill, and/or Cut FillSelects which category the fill override applies to.
SurfaceCut Surfaces and/or Uncut SurfacesDetermines whether the surface override affects cut surfaces, uncut surfaces, or both.

The selections in the table are not a fixed recipe; they are the coverage options described in the documentation. It isn’t possible to recommend a single value without knowing the target elements and the intended visual distinction.

4. Check renovation rules and limitations

The first three rules in the list are associated with the renovation statuses Existing, To be Demolished, and New. Their criteria cannot be edited, and these rules cannot be duplicated. Renovation status is assigned individually to model elements. Since additional override settings can also be found in Renovation Filter, don’t assume that the entire renovation appearance is determined solely by the selections in the Graphic Override Rules dialog.

Common mistakes

  • Looking for sub-elements or Morph faces in the Element Type list; the documentation says they are not available there.

  • Trying to use IFC Properties as an additional criterion; this interface does not support it.

  • Overlooking the visibility condition for a layer criterion; the result is limited to elements visible in the relevant layer combination.

  • Trying to change the criteria of the first three rules for renovation statuses or duplicate those rules; these actions are not supported.

  • Assuming all surfaces and fills will be affected without selecting Cut and Uncut surfaces or the relevant fill categories.

Impact on architecture and visualization workflows

This tool can be useful for architecture and interior design teams that want to distinguish elements in the same model using different line, fill, or surface appearances based on criteria. When visually differentiating renovation statuses in particular, check the renovation statuses assigned to elements and the Renovation Filter options alongside the built-in status rules.

The documentation does not specify hardware requirements, performance measurements, pricing, or licensing terms. So, when planning a rule structure, verify the Archicad version and license coverage used by your organization rather than assuming hardware or cost benefits. The most important practical checks are whether the selected criteria cover the intended elements and whether the appearance change is assigned to the correct fill or surface category.

Sources

1 source
H
help.graphisoft.comhelp.graphisoft.com/AC/29/INT/_AC29_Help/050_ViewsVB/050_ViewsVB-120.htm
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For architecture firms and visualization teams in Turkey, the practical value of Graphic Override Rules lies in their ability to consistently distinguish elements in the same model by applying defined criteria. Grouping rules and searching by name can make them easier to manage as a project grows, but choosing the wrong criteria may mean the intended elements’ appearance doesn’t change.

The source documentation does not specify hardware requirements, pricing, or licensing terms for this feature, so no additional cost or speed claims should be made. The key things for offices to check are visibility in the layer combination, whether the renovation status has been assigned to the element, and the Cut/Uncut surface selection.

Frequently asked questions

Where do I open Graphic Override Rules in Archicad 29?

Open it from `Document › Graphic Overrides › Graphic Override Rules`. The relevant links in the Graphic Override Combinations and Renovation Filter Options dialogs also take you to rule management.

Can IFC Properties be used as a criterion with Graphic Override Rules?

No. According to the Archicad help documentation, IFC Properties cannot be used in this criteria interface.

Can I edit the first three rules for Archicad renovation statuses?

No. The criteria for the first three rules, corresponding to Existing, To be Demolished, and New, cannot be edited, and these rules cannot be duplicated.

Comments and the forum are in Turkish.Join the discussion
+

Related news