Latest news
Tips & GuidesRedshiftMari

Redshift AOV Guide: The Right Passes and EXR Workflow for Architectural Renders

Redshift AOVs let you adjust lighting and material components of a render on separate layers. This guide explains workflows documented for Cinema 4D and Maya, EXR options, and Deep Output.

Contemporary interior visualization with lighting, reflection, and depth layersAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. AOVs help you adjust render components such as reflections and global illumination separately.
  2. In Cinema 4D, Multi-Pass and Direct Output can both be enabled for the same AOV; each method produces files.
  3. When multiple AOVs are directed to the same file path, Redshift can combine them into a single layered EXR file.
  4. Deep Output stores multiple samples per pixel, which can increase file size and storage requirements.

In Redshift, AOVs (arbitrary output variables) are used to adjust different components of an architectural render separately in post. Maxon’s Cinema 4D and Maya documentation explains how to create AOVs, choose an output method, organize EXR files, and use Deep Output. This guide brings together the documented options for interior and architectural visualization workflows. The documentation does not specify a particular Redshift version for general AOV settings. Support for volume rendering with Deep Output is noted for Redshift 3.0.32 and later.

1. Identify the AOVs you need

AOVs separate the information that makes up the final image for different purposes. Integrated AOVs provide shading components such as reflections, refractions, diffuse lighting, and global illumination. Utility AOVs can carry data beyond the beauty image, such as depth, motion vectors, or world position. Custom AOVs can be used for outputs not covered by the built-in options. Redshift can process AOVs at the same time as the main beauty render, eliminating the need for a separate render for the custom outputs shown in the documentation.

If you need to change a material or lighting contribution later, plan the relevant AOV before rendering. The Reflections AOV contains the reflection component, while specular reflections created by lights on surfaces are found in the Specular Lighting AOV. The Global Illumination AOV carries indirect lighting, and the Background AOV contains the background and environment component. These distinctions help determine which layer to adjust during compositing.

In Cinema 4D, go to Render Settings › AOV to access the AOV settings and open the AOV Manager. The documentation also notes that the Manager can be accessed via a button in Render Settings or from the Redshift menu. In the AOV Manager, you can add, reorder, edit, or delete options.

2. Choose an output method and file settings

Cinema 4D has two main output paths: Multi-Pass and Direct Output. Multi-Pass offers advantages such as Picture Viewer integration, automatic management of AOV images during TeamRender, and compatibility with some Cinema 4D post effects. However, its save options per AOV are limited; a single save format is used for all AOVs, and there is no full control over naming and order.

Direct Output gives you more control over file options and output names for each AOV. Deep EXR support is also among its features. However, AOVs do not appear in Picture Viewer; for TeamRender, output paths must be manually set to suitable locations, such as network shares. Cinema 4D post effects and compositing project support are not available with Direct Output.

It is possible to enable both methods for the same AOV, but each system will then produce its own files. Choose based on the delivery format, team workflow, and file management needs. The Cinema 4D documentation lists the following defaults for Redshift AOVs:

SettingDefaultEffect
File formatOpenEXRThe default file format for Redshift AOVs.
Bits per channelHalf float (16 bits)The default bit depth for Redshift AOVs.
EXR storage formatScanlineThe default storage format for Redshift AOVs.
DWA compression level45Applies to DWAA and DWAB; a higher value means more compression and a smaller file. The documentation describes level 45 as the default, significantly reducing file size without perceptible loss.

These are the defaults given in the documentation, not mandatory quality settings for every delivery. The Cinema 4D documentation lists OpenEXR, TIFF, PNG, Targa, and JPEG as AOV file formats. Depending on the format used, the available bits-per-channel options may be 8-bit, Half float (16 bits), or Float (32 bits).

3. Organize AOVs in EXR files

Saving each AOV to a separate file for every frame in an animation can increase the number of files. According to the Redshift documentation, directing AOVs to the same file path can combine multiple EXRs into a single layered EXR file. This lets you work with layers inside one file instead of separate files.

Multi-Part EXR can also store multiple AOVs in one OpenEXR file. The documentation notes that different compression types and layouts can be used, and that deep data layers can be stored in the same file as regular images. When Auto-Crop is enabled, the data window can be limited to the area containing non-black pixel data; entirely empty channel areas are excluded. This option can help the compositing application focus processing on the area containing actual render data.

Review file names and output paths before rendering. In Cinema 4D, path and naming options for AOVs using Direct Output are available in the AOV settings. Also account for the possibility that enabling Multi-Pass and Direct Output together may create two separate output streams.

4. Evaluate Deep Output for your scene

In a standard image, a pixel holds a single value. This limitation can cause problems in compositing when multiple objects contribute to the same pixel because of silhouettes, transparency, depth of field, or motion blur. Deep EXR stores different samples and depth information together for the same pixel, allowing these contributions to be handled in greater detail. Storing more samples can increase file size and storage requirements.

In Cinema 4D, follow these steps for Deep Output:

  1. In the General section of the AOV tab, enable Multi-Part EXR.

  2. Add and enable an AOV of type Main.

  3. Select Direct Output and the OpenEXR format for the Main AOV. In Cinema 4D, Deep Output requires the Main AOV to be set to Direct Output.

  4. In the Processing section of the AOV tab, enable Deep Output.

  5. Choose a Deep Merge Mode to suit the scene and check the result with a small test render.

Z mode merges depth samples that are close together based on the Deep Merge Z Threshold value. The lower the threshold, the fewer samples are merged, so more samples may remain in the file. Raising the threshold can reduce the number of samples and file size, but may also affect the detail retained. In the documentation’s example, raising the value from 0.01 to 0.1 reduced the number of samples in the inspected pixel from 218 to 37. This comparison is from a specific scene; it is not a recommended value for every project.

ObjectID mode merges samples with the same ObjectID, regardless of their depth proximity. Although this can produce smaller files, objects must be assigned different ObjectIDs. If objects in separate deep EXR files intersect along the depth axis, visual errors may appear in compositing. The Cinema 4D documentation describes Z and ObjectID modes. The Maya documentation also includes MeshID mode, which uses the unique IDs assigned to meshes by Redshift and does not require manually assigning ObjectIDs to separate objects. MeshID is a setting described in the Maya documentation.

What changes in architectural and interior workflows?

AOVs give visualization teams flexibility on projects where lighting, reflection, or background contributions need to be adjusted separately after the final render. They can simplify layered EXR file management in animations; Deep Output can provide more detailed data for images with complex transparency or motion blur. At the same time, file format, number of AOVs, output method, and storage requirements should all be considered together. Enabling every AOV or using Deep Output on every project does not automatically make for a better workflow.

Common mistakes

  • Enabling Multi-Pass and Direct Output together without accounting for both systems producing files.

  • Forgetting to set the Main AOV to Direct Output and OpenEXR in Cinema 4D for Deep Output.

  • Overlooking that lowering the Z threshold merges fewer samples and can increase file size.

  • Failing to assign different IDs to objects in ObjectID mode, or not assessing the risk of intersections in separate deep EXRs.

  • Not organizing file paths and team-sharing requirements in advance when using Direct Output.

Sources

3 sources
H
help.maxon.nethelp.maxon.net/r3d/maya/en-us/Content/html/AOV%2B-%2BAdvanced.html
Summary
H
help.maxon.nethelp.maxon.net/r3d/cinema/en-us/Content/html/EXR%2BTopics.html
Summary
H
help.maxon.nethelp.maxon.net/r3d/cinema/en-us/Content/html/Intro%2Bto%2BAOVs.html
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For architecture and visualization studios in Turkey, the practical benefit of an AOV workflow is the ability to adjust lighting and material components separately without rendering again. In return, teams need to clarify the delivery format, compositing software, and file-sharing setup in advance. Enabling Multi-Pass and Direct Output together can create unnecessary duplicate outputs.

Deep EXR and higher bit depth provide more data, but also increase storage requirements. Rather than enabling every option on every project, a more cautious approach is to check scene-appropriate settings with small test renders. The documentation does not include pricing or licensing terms; studios should assess their existing licenses and hardware requirements for their own workflows.

Frequently asked questions

What is a Redshift AOV?

An AOV lets Redshift separate different types of information in a render into individual outputs. Components such as reflections, global illumination, and depth can be handled separately during compositing.

How do you enable Deep Output in Cinema 4D?

Enable Multi-Part EXR, add a Main AOV and select Direct Output and OpenEXR; then enable Deep Output in the Processing section of the AOV tab.

Can Redshift AOVs be combined into a single EXR file?

Yes. Directing AOVs to the same file path lets you combine them into a single layered EXR file. Multi-Part EXR can also store multiple AOVs in one OpenEXR file.

Comments and the forum are in Turkish.Join the discussion
+

Related news