Latest news
Tips & GuidesRhino

Rhino 8 Picture and Scale Commands: A Guide to Placing Images

In Rhino 8, the Picture command places a bitmap image on a plane while preserving its aspect ratio; the Scale family resizes objects along different axes and planes. This guide explains how to use the commands and configure image materials.

A carefully scaled contemporary architectural model beside an architectural reference printAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. Picture creates a rectangular planar surface and assigns the image to its material.
  2. The Picture plane preserves the aspect ratio of the image used.
  3. Scale, Scale1D, Scale2D, and ScaleNU offer scaling options in different directions.
  4. Picture materials do not support transparency for JPEG, PCX, or Windows Bitmap files.

This guide summarizes the Picture and Scale commands described in McNeel’s Rhino 8 documentation, with a focus on architectural modeling and image-preparation workflows. Picture turns a bitmap into a planar surface and assigns the image to its material; the Scale family changes the size of selected objects in one or more directions. The features described here are based on the Rhino 8 documentation.

1. Placing an image in the scene with Picture

  1. Select an image for the command. Start the Picture command and select an image. If an image has already been copied to the clipboard, you can also use it with Ctrl+V. The image is assigned to the planar surface’s material.

  2. Set the plane’s position and size. Select the first corner, then specify the opposite corner or enter a length. The rectangle preserves the image’s aspect ratio, so the image’s horizontal-to-vertical proportions are not changed when defining the plane.

  3. Choose a drawing method to suit your needs. By default, the command draws the rectangle using two opposite corners. The documentation also includes options to create a rectangle using three points or the midpoint of an edge, draw the plane vertically, and position it by specifying its center. AroundCurve creates a rectangle perpendicular to a curve; with this method, you select the curve and the plane’s center position.

  4. Consider using print size. The 1to1 option places the plane at a print size calculated from the bitmap’s pixel dimensions and resolution (DPI). This option may be useful when you want to use the print size based on the image’s file information.

Picture objects have their edges and isocurves turned off in all display modes. The command displays the rectangular planar surface containing the image in a way similar to the Rendered display mode. The resulting Picture material can be edited in the Materials panel. Dragging an image file onto a Rhino object also creates a Picture material assigned to that object; in this case, the material takes the image file’s name.

2. Picture material and transparency options

  1. Check the image material’s properties. A Picture material includes the bitmap’s name and file path. Its texture tiling setting cannot be changed, so you cannot use that setting to change the image’s repetition pattern.

  2. Set how the image responds to light. When Self-Illumination is enabled, the image displays at full intensity and is unaffected by light or shadows. The Grayscale option converts the image’s color to a 256-level gray display.

  3. Choose a transparency method based on the image file. The material supports using the image’s alpha channel or designating a color in the image as a transparency mask. If there is no alpha channel, you can select a transparency color; the tolerance setting determines how closely colors in the texture must match the selected color. Transparency is not supported for JPEG (.jpg, .jpeg), PCX (.pcx), or Windows Bitmap (.bmp) formats.

  4. Distinguish texture transparency from object transparency. An alpha channel or color mask applies transparency to the image, while Object transparency makes the entire object transparent. If you need to replace the image file, use the file selection option in the material properties; you can also remove the attached texture.

When a Picture plane is split and reduced in size, a new material is added for each resulting plane. The documentation explains that this is intended to keep the texture appearance consistent. For this reason, check the relevant material and texture appearance after making these changes to the geometry.

3. Choosing the right Scale command

First select the objects to transform, then choose the command that suits your needs. Scale enlarges or reduces objects equally in the X, Y, and Z directions. You can select a base point; alternatively, the center of the selected objects’ bounding box can serve as the base point. You can enter a scale factor or specify two reference points.

SettingSuggested valueEffect
Scale1D scale factor0Flattens the object in the selected direction.
Axis to keep unchanged in ScaleNU1.0Leaves the scale along that axis unchanged while allowing separate factors in other directions.
Scale2D scaling directionsActive viewport’s construction plane axesScales the object equally in two directions.

Scale1D changes the size only along the specified direction; it does not expand or shrink the object in other directions. Scale2D scales in two directions along the active viewport’s construction plane axes. ScaleNU lets you enter different factors for the X, Y, and Z directions. If a dimension along one axis needs to remain unchanged, the documentation specifies using 1.0 for that axis.

ScaleByPlane performs non-uniform scaling along the two axes of a selected plane. The reference plane can be the active construction plane, a plane defined by three points, a planar object, a viewport plane, or one of the world planes. To change an object from its current size to a specific size, you can define the starting dimension using reference points and enter the new size as the second reference point.

When you need to scale the distribution of object positions rather than the objects themselves, you can use ScalePositions. The command repositions objects by moving the center points of their bounding boxes to new locations. The 1D, 2D, and 3D modes determine how many directions the positions are arranged along. The scaling commands also include a Copy option, which controls whether objects are copied during the transformation when enabled.

4. Use in architectural and visualization workflows

Picture can be used to place a bitmap as a planar reference in model space. Preserving the aspect ratio prevents the image’s width and height from being changed independently. If the image needs to display at full intensity without being affected by light or shadows, you can use the Self-Illumination option. If transparency is needed, check the file format and whether it has an alpha channel before proceeding.

The choice of scaling command depends on which directions need to change: use Scale1D for a one-direction adjustment, Scale2D for an equal change along the two axes of the active construction plane, or ScaleNU when you need separate factors for three axes. Since the command’s base point, reference points, and Copy option affect the result, review them before delivering the model. This documentation is for Rhino 8; no assumptions are made here about behavior in other versions.

Common mistakes

  • Assuming the Picture rectangle’s aspect ratio can be changed independently of the image.

  • Expecting transparency to work with JPEG, PCX, or BMP files.

  • Thinking Scale1D also changes the object’s size in other directions.

  • Overlooking the 1.0 factor for an axis that should remain unchanged in ScaleNU.

  • Mistaking ScalePositions for a command that changes object size; it adjusts positions by scaling the center points.

Sources

2 sources
D
docs.mcneel.comdocs.mcneel.com/rhino/8/help/en-us/commands/picture.htm
Summary
D
docs.mcneel.comdocs.mcneel.com/rhino/8/help/en-us/commands/scale.htm
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For architecture and visualization studios in Turkey, the practical benefit of these commands is that they separate image-reference placement from model scaling into distinct, easy-to-understand tools. Picture’s aspect-ratio preservation reduces the risk of accidentally stretching a reference image, while the Scale options address different axis requirements.

Efficiency depends on choosing the right command and reference point; using the wrong scaling method or expecting transparency from an unsupported file format can slow down the work. McNeel’s documentation does not provide information about pricing, licensing terms, or hardware requirements. These points should be assessed separately in terms of project or studio budgets.

Frequently asked questions

Does Rhino 8’s Picture command preserve an image’s aspect ratio?

Yes. The rectangle created with Picture preserves the aspect ratio of the image used.

Which file formats do not support transparency in Rhino Picture materials?

The documentation states that transparency is not supported for JPEG (.jpg, .jpeg), PCX (.pcx), or Windows Bitmap (.bmp) files.

How can I scale an object in only one direction in Rhino?

The Scale1D command changes an object’s size along one specified direction without changing its size in other directions.

Comments and the forum are in Turkish.Join the discussion
+

Related news