In brief
- Array duplicates objects in rows, columns, and levels along the active construction plane’s X, Y, and Z directions.
- ArrayLinear creates copies in one direction; ArrayPolar creates copies around a center point.
- ArrayCrv places objects along a selected curve; ArrayCrvOnSrf places them along a curve on a surface.
- According to the Rhino 8 documentation, a rectangular array requires at least 1 copy, while a polar array requires at least 2 items.
Rhino 8’s Array tools offer different ways to create a repeating pattern from a single object. The commands covered in McNeel’s official Rhino 8 documentation include rectangular arrays along the active construction plane’s axes, linear arrays in one direction, polar arrays around a center point, and arrays along a curve or a curve on a surface. This guide walks through which modeling task each tool suits and how its settings affect the result.
Choose the array type first
Choose Array to create a regular grid or stacked pattern. The Array command, found at
Transform › Array › Rectangular, arranges copies along the active construction plane’s X, Y, and Z directions. This lets you distribute the same object in rows and columns on a plane, as well as across levels in the vertical direction. The command can work from either the number of copies or the spacing between objects. The documentation specifies a value of 1 or greater in each direction for the number of copies.Use ArrayLinear when you need repetition along a single axis. ArrayLinear, found at
Transform › Array › Linear, copies objects in one direction. The first and second reference points set the array’s direction and the spacing between objects. This method is suited to elements arranged in a line or other linear patterns. Set the total number of objects with theNumberoption;Previewdisplays a live preview as you make changes.Switch to ArrayPolar to create copies around a center point. In the command at
Transform › Array › Polar, select the objects first, then specify the array center. The rotation axis is the Z direction of the active construction plane at the center point. Then enter the number of items and the angle to fill. The documentation states that the item count must be 2 or greater. To change the direction of the pattern around the center, define an axis line withAxis;StepAnglesets the angle between objects.Rotaterotates the copies as the array is created, whileZOffsetoffsets each copy in the Z direction.
Arrays along curves and surfaces
Use ArrayCrv to create a pattern that follows a path. The
Transform › Array › Along Curvecommand copies objects at intervals along a curve. When selecting the curve, clicking near the end where you want the array to start helps set its starting position. If the object is not on the curve, theBasepointoption defines the reference point used to position it on the curve.You can build the array by specifying either the number of items or the spacing along the curve.
Itemssets the number of items placed along the curve;Distancesets the spacing between them. When using the distance method, the total number of items is determined by the curve’s length. If you need to use only part of the curve, typeSubCrvduring selection to use a curve segment as the input.Consider ArrayCrvOnSrf when the curve follows a surface. The
Transform › Array › Along Curve on Surfacecommand copies and rotates objects along a curve on a surface. The surface normal determines the orientation of the objects in the array. First, select the objects and a base point; then select a path curve near its starting end and choose a surface. You can set the objects’ positions by clicking along the curve or by entering a distance from the last position. TheDivideoption sets the number of objects;SubCrvlets you use only part of the curve as input.
How should you choose the settings?
The limits and behaviors below are described in the Rhino 8 documentation. They are not universal spacing recommendations for every scene; they explain how the commands work.
| Setting or command | Value/behavior specified in the documentation | Effect |
|---|---|---|
| Array copy count | 1 or more in the X, Y, and Z directions | Sets the size of the grid or stacked pattern. |
ArrayLinear Number | Specifies the total number of objects | Sets the number of repetitions in one direction. |
ArrayCrv Items | Specifies the number of items | Defines how many items are placed along the curve. |
ArrayCrv Distance | Specifies the spacing between items | The total number of items is determined by the curve’s length. |
| ArrayPolar item count | 2 or more | Sets the number of repetitions around the center. |
ArrayPolar StepAngle | Specifies the angle between objects | Sets the angular spacing in the polar array. |
Using arrays in architectural and visualization workflows
Instead of copying repeated structural or interior elements by hand, architects and interior designers can choose the Array type that fits the geometry of the layout. Array is a direct option for patterns across planes, ArrayLinear for a row in one direction, and ArrayPolar for placements around a center. ArrayCrv can be used for elements that follow a path, while ArrayCrvOnSrf is an option for a path on a surface. Choosing the right command at the outset can reduce manual positioning when building the desired layout.
Pay particular attention to the references that determine the result: Array directions depend on the active construction plane; in ArrayLinear, the second reference point affects the direction and spacing; and in ArrayPolar, the center and rotation axis matter. For arrays along a curve, check the starting end, base point, and choice of spacing or item count. The documentation does not provide specific hardware requirements, licensing information, or performance comparisons for these tools, so choose based on the model’s geometry and the layout you need.
Common mistakes
Overlooking the construction plane: The rectangular array’s directions depend on the active construction plane’s X, Y, and Z axes. If copies are not appearing in the expected direction, check the active plane first.
Leaving the curve’s starting point unclear: For ArrayCrv, select the path curve near the end where you want the array to begin. If the object is not on the curve, define an appropriate
Basepoint.Confusing spacing with item count: In ArrayCrv,
Itemssets the count;Distancesets the spacing, and the total count depends on the curve’s length.Not checking the axis and direction in a polar array: The default rotation axis is the Z direction of the active construction plane at the center. Use
Axisif you need a different axis, and useRotateto specify whether the copies should rotate.Ignoring the surface normal in an array on a surface: In ArrayCrvOnSrf, the surface normal determines orientation, so take the surface’s direction into account when assessing the result.
Sources
2 sourcesSource texts are not republished; short quotes are marked, everything else is our own summary and commentary.
For architecture and visualization teams in Turkey, the practical value of Array commands lies in creating repeated geometry with a method suited to the scene’s layout. Having different tools for grids, linear rows, circular patterns, and arrays along curves reduces the need to apply a single method to every problem.
The main things to watch are the construction plane, starting point, and spacing method. The documentation does not specify hardware requirements or licensing terms, so no additional assumptions should be made about those points. In particular, checking the result of arrays along curves and surfaces can prevent the wrong direction or base point from wasting time during modeling.
Frequently asked questions
How can I duplicate objects along a curve in Rhino 8?
Use the ArrayCrv command at `Transform › Array › Along Curve`. You can set the number of objects with `Items` or their spacing with `Distance`.
What is the minimum number of items for ArrayPolar in Rhino?
According to the Rhino 8 documentation, ArrayPolar requires 2 or more items.
What is the difference between ArrayCrv and ArrayCrvOnSrf?
ArrayCrv duplicates objects along a curve. ArrayCrvOnSrf works along a curve on a surface, with the surface normal determining the array’s orientation.



