In brief
- Hotlink sources include PLN, MOD, IFC, Rhino and RVT files; a BIMcloud Teamwork project must use the same version as the main project.
- Sources marked “Modified” can be updated in Hotlink Module Manager, and changes can be reviewed with Model Compare.
- Elements in a module cannot be edited individually while the link remains active.
- Breaking the link makes elements editable in the main project, but Hotlinks on locked layers are unaffected by this operation.
This guide covers the Hotlink module workflow described in Graphisoft’s Archicad 29 help documentation. Hotlinks connect content from external files to the open project, making it possible to manage similar building components—such as hotel rooms and repeating office sections—from a shared source. Changes made to the source can be transferred to module instances in the main project, and changes after an update can be reviewed with Model Compare. The steps below are limited to the options documented for Archicad 29.
1. Choose the source file and define the MOD scope
Solo Project (.pln), Module (.mod), 2D Lines (.2dl), IFC, Rhino (.3dm) and RVT files can be used as Hotlinks. A Teamwork project on BIMcloud must use the same Archicad version as the main project. First, decide which file will hold the repetitive content and whether that content will also be used in other projects.
If you need a smaller, more focused file, consider the MOD format. A MOD file contains model and Floor Plan data; it does not contain Section/Elevation/Interior Elevation, Worksheet/Detail or 3D Document data. Because it includes only the attributes used by its elements, it is smaller than a PLN file. To create a MOD from the Floor Plan:
Open
File > Save Asand select.modas the file format.Confirm the warning that the file will contain Floor Plan data only.
Use Save Options to change the story and element scope. All Stories is the default; you can also select the current story or a specific range of stories.
When you select a story range or the current story, “Add relevant elements from other Stories” can also include elements displayed on relevant stories that have a “Relevant Stories” setting. When saving elements, “All elements (hidden and visible)” includes all Floor Plan elements, while “Visible elements only” includes elements on visible layers that are visible according to Partial Structure Display settings, are part of the active Design Options, and are available based on the renovation status. You can also choose to break nested Hotlink and Xref links in the MOD if they are no longer needed or their sources may not be accessible.
2. Match placement and story settings
Hotlink settings are available in the Place Hotlink dialog or through Hotlink Selection Settings for a selected module. Instances from the same source file can have different Master Layer, orientation and Design Option settings. Before placing each instance, determine its visibility and presentation needs in the main project.
| Setting | Recommended value | Effect |
|---|---|---|
| Master Layer | A layer suited to the main project’s management needs | Controls the visibility and locking of the entire Hotlink. |
| Layer structure | The same layer structure in the source and main project | Helps place element layers consistently in the main project. |
| IFC elevation | Keep Elevation | Preserves IFC element positions in projects with different story structures. |
| Nested modules | Include if needed; skip if not | Determines whether submodules appear in the selected Hotlink. |
| Orientation | The required angle; mirror if needed | Rotates or mirrors the Hotlink relative to its source orientation. |
If the source file and main project have different story structures, you can adjust element elevations to the main project’s story levels or preserve their positions in the source file. The first option may change the vertical positions of elements. Graphisoft recommends using Keep Elevation for IFC Hotlinks; otherwise, the model may be scattered across stories when the story structures differ. If the main project has fewer stories than the module, the module’s stories that do not fit in the main project will be invisible. In that case, create the required stories in the main project.
3. Check source status and update
Open Hotlink Module Manager from File > External Content > Hotlink Module Manager. The top section lists the module hierarchy, while the bottom section shows source file names and statuses. Select a source to view its file size, modification time, last update time and location.
Check the source status. “Modified” means the source has changed; “Missing” means the file cannot be found.
For a source marked “Modified”, select the file and use the
Updatecommand. You can also useHotlink Modules > Update Module and All Related Hotlinksfrom the context menu of the selected Hotlink.To review the impact of the update, choose
Update, then Compare. Model Compare helps visualize the differences before and after the update.If you have located a “Missing” source, use
Relinkto specify its new location. The file you relink as an IFC source must also be in IFC format.
Relinking clears the project’s undo queue. If the new source has a different story structure from the main project, you may see a warning that some dimensions and labels could be lost; verify the file and story structure before proceeding. If the automatic status check that runs when Hotlink Module Manager opens slows down your work, you can disable it in Options > Work Environment > Data Safety and Integrity.
4. Consider breaking the link for rendering
Elements in a Hotlink cannot be edited individually while they remain part of the module. If you need independent access to each element when preparing a render, consider using Break Link in a copy of the project. This embeds Hotlink elements in the main project, converts them into grouped, regular elements and ends the link to the source file. For a single instance, use Break Hotlink (Embed Elements) in Hotlink Settings.
After the link is broken, changes to the source file will no longer be transferred to these elements. Also, Break Link has no effect on Hotlinks on locked layers and cannot be used for nested modules. Deleting a module removes the Hotlink and its placed instances from the project, but Hotlinks or elements on locked layers are not deleted. Before deleting or breaking links in a working file, check which instances will be affected.
Review library parts in advance, too: library parts linked to the source are not automatically imported when the Hotlink is placed. You need to use the same libraries in the source and main project or add the source libraries to the main project. Embedded library parts from the source are added to the automatically generated “Hotlinks” folder in the main project’s Library Manager.
Common mistakes
Assuming the main project reflects the latest source without updating a source marked “Modified”.
Selecting the wrong file for a “Missing” source, or trying to relink an IFC source using a non-IFC file.
Failing to check elevation settings when story structures differ, or overlooking the
Keep Elevationoption for IFC.Trying to edit individual elements inside a Hotlink while the link is active, or expecting source updates to continue after breaking the link.
Failing to make the linked libraries used by the source accessible in the main project.
Impact on architecture and visualization workflows
Hotlinks help manage repetitive content from a shared source in projects with many similar rooms or sections. Transferring source changes to the relevant instances can reduce the need to update each one separately, while Model Compare makes it easier to review changes. For this approach to work well, source files must remain accessible and layer and story structures must be checked.
At the visualization stage, the key decision is whether to keep the Hotlink active to preserve update flexibility or to edit specific elements independently. In the latter case, breaking the link ends the update relationship with the source, so working in a project copy helps preserve the main model’s connection to it. These Archicad 29 documents do not cover hardware, licensing or pricing information; consult the relevant official product information separately for those details.
Sources
3 sourcesSource texts are not republished; short quotes are marked, everything else is our own summary and commentary.
The practical value of Hotlinks is that they make it possible to work from a shared source for repetitive spaces. For project offices in Turkey, this approach can reduce repetitive work when paired with consistent source management and update checks; differing story structures and inaccessible files, however, can disrupt the process.
Breaking the link is useful when independent editing is needed before rendering, but it ends the update relationship with the source. For that reason, working in a visualization copy is a more controlled choice. The documentation does not specify hardware requirements, licensing terms or pricing; rather than making assumptions, check the official product information separately.
Frequently asked questions
Which file types do Archicad 29 Hotlink modules support?
PLN, MOD, 2D Lines (.2dl), IFC, Rhino (.3dm) and RVT files can be placed as Hotlinks. The BIMcloud Teamwork project must use the same Archicad version as the main project.
How do you update an Archicad Hotlink source?
In Hotlink Module Manager, select the source marked “Modified” and use the `Update` command. After updating, you can review changes with `Update, then Compare`.
Can you edit elements in a Hotlink individually?
Elements in a Hotlink cannot be edited individually while the link is active. Breaking the link makes the elements editable in the main project, but ends their connection to the source file.



