Latest news
Making Artificial Lights Visible in Lumion Daytime Scenes: Ray Tracing Settings GuideThe right settings for fast, high-quality single renders in Enscape: a practical guideCreating Animations with Scenes in SketchUp: Step-by-Step GuideV-Ray and Corona LightMix: A Guide to Post-Render Light EditingHow to run noise analysis in Autodesk Forma: an early-design guideGaussian Splatting in V-Ray: 3ds Max guide to VRayGaussiansGeomHow to Use Gaussian Splatting in Chaos Vantage: Setup and TipsCorona 16 AI Assistant and Gaussian Splat Relighting: a step-by-step guideV-Ray Standalone Denoiser (vdenoise) Guide: Reducing Render NoiseGuide to rusty metal and cracked concrete surfaces with Corona Layered Material
Tips & GuidesLumion

Making Artificial Lights Visible in Lumion Daytime Scenes: Ray Tracing Settings Guide

Since Lumion 2023, the lighting system switched to real-world units, so spot, omni, and emissive lights can stay dim in daytime scenes; according to official Lumion documentation, lowering Sun and Sky brightness solves the problem.

Interior render image balanced with daylight, showing visible artificial lightingAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. Since Lumion 2023, the lighting system has used real-world units like Lumen/Nit, so the Sun competes with artificial lights within the same system.
  2. Per official documentation, midday Sun measures around 1,600,000,000 Nits, while night sky measures around 0.001 Nits.
  3. Emissive materials max out at 10,000 Nits, Area Lights at 100,000 Nits, and Spot and Omni lights can reach up to 100,000 Lumens.
  4. The fix involves first lowering Sun/Sky brightness, then enabling Ray Tracing and gradually increasing light values.

According to Lumion's official support documentation, the software's lighting engine changed fundamentally with the 2023 release. Sun, sky, spot lights, omni lights, area lights, and emissive materials now all operate within the same unified system, using real-world measurement units like Lumen and Nit. This change made render quality more realistic, but it also brought a common complaint: artificial lights placed in daytime scenes become nearly invisible in Build Mode or in Photo/Movie Mode previews.

Why do daytime lights disappear?

According to the documentation, older Lumion versions (12.x and earlier) controlled lights through different shaders and 'imaginary' units, making it easy to achieve daytime lighting brightness levels that aren't actually possible in reality. In the new system, the scales are closer to real-world values: while midday Sun sits at around 1,600,000,000 Nits, the night sky remains around 0.001 Nits. By comparison, emissive materials can produce at most 10,000 Nits, area lights at most 100,000 Nits, and spot and omni lights at most 100,000 Lumens (1 Lumen = 0.29188 Nits). This gap is so large that when the Sun and sky are left at full brightness, no artificial light can compete with them.

The solution: adjust the sky first, then the lights

The method recommended in the official source is built around dimming ambient light first, rather than increasing the lights:

  1. Work within Photo/Movie Mode, don't rely solely on the Build Mode preview.

  2. Lower the Brightness and Background Brightness values from the Real Skies / Sky Effect panel.

  3. Reduce the Sun Height and Sun Intensity values via Sun Effect.

  4. Choose a Style suited to the scene: Day, Interior, or Overcast; avoid the brightest midday sky option.

  5. Enable the Ray Tracing effect; this makes lights behave physically and cast accurate shadows.

  6. Set spot and omni lights to reasonable Lumen values and emissive materials to reasonable Nit values; increase gradually if needed once the sky is dimmed.

  7. Add Lens Flare and optionally Bloom effects to make the lights' 'glow' effect more pronounced.

  8. For final fine-tuning, increase the Gamma value within the Color Correction Effect, typically between +0.05 and +0.5, then adjust Exposure.

The comparative examples in the documentation confirm this logic: the same 2200-Lumen spot light is nearly invisible in a room with direct sunlight present, but becomes clearly visible once the sun is dimmed; when the light is increased to 16,000 or 100,000 Lumens, the shadows (umbra) become even more defined.

SettingRecommended ApproachEffect
Real Skies BrightnessLower itReduces sky and ambient light, making artificial lights stand out
Sun Intensity / Sun HeightLower itReduces direct sunlight's competition with artificial light
Spot/Omni Lumen valueIncrease after dimming the skyLight and shadow (umbra) become clearer
Emissive Nit valueKeep at a max of 10,000 NitsMaterial doesn't overglow while emitting light
Gamma (Color Correction)Between +0.05 and +0.5Brightens whites, eases exposure adjustment

What does this mean for architectural visualization teams?

For studios preparing day-to-night transition clips in interior presentations, this method is critical: by gradually reducing Real Skies Brightness and Sun/Sky via animation and keyframing light intensities, it's possible to keep the lighting readable without 'blowing out' throughout the day. A point to watch for in older projects using Fill Light: Fill Lights don't cast shadows in Ray Tracing and need to be replaced with an OmniLight without an IES profile. It should also be noted that daytime scenes prepared in Lumion 12.x and earlier won't look identical in post-2023 versions, and light values need to be recalibrated.

Common mistakes

  • Trying to increase lights first: Raising the Lumen value while the Sun/sky is still dominant doesn't change the outcome; ambient light should be dimmed first.

  • Checking only in Build Mode: The actual result can only be seen with the full effect stack (including Ray Tracing) in Photo/Movie Mode.

  • Leaving Fill Light in a Ray Tracing scene: This light type doesn't cast shadows and won't produce the expected result in ray tracing.

  • Directly carrying over light values from old version projects to the new version: Since the unit system has changed, readjustment is required.

Sources

2 sources
S
support.lumion.comsupport.lumion.com/knowledge-base/ray-trace-rendering-in-lumion-pro-guides-for-great-renders
Summary
S
support.lumion.comsupport.lumion.com/knowledge-base/how-do-you-improve-the-rendering-of-artificial-lighting-for-day-time-renders
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For offices in Turkey, this change is actually a benefit: working with real-world units brings lighting design closer to field application and provides consistency in day-to-night transition animations presented to clients. However, teams migrating old project files to post-2023 versions need to review light values from scratch; otherwise scenes may turn out dimmer than expected.

There's no additional cost on the hardware side, since this is purely a matter of in-software settings; since Ray Tracing is a GPU-dependent feature anyway, an RTX-capable graphics card is recommended. Nothing changes licensing-wise, it just adds a few minutes of setting adjustments to the workflow. The biggest gain for small studios is reaching the correct result quickly by following the documented order (sky first, then light) instead of spending hours on trial and error.

Frequently asked questions

Why don't artificial lights show up in daytime scenes in Lumion?

In Lumion 2023 and later, the lighting system switched to real-world units (Lumen/Nit); since midday Sun is around 1,600,000,000 Nits, artificial lights producing at most 100,000 Lumens/Nits can't compete with that brightness.

Which setting should be changed first to make lights visible in a daytime scene?

First, the Brightness value in Real Skies/Sky Effect and the Sun Intensity value in Sun Effect should be lowered; light values should only be increased after that.

Do Fill Lights work with Ray Tracing?

No, according to the documentation, Fill Lights don't cast shadows in Ray Tracing and can only be used in the Rasterization render pipeline; in Ray Tracing scenes, replacing them with an OmniLight without an IES profile is recommended.

Comments and the forum are in Turkish.Join the discussion
+

Related news