In brief
- In Landscape Mode, select the Spline tool from the Manage tab to create control points on the terrain.
- Adding a Spline Edit Layer lets the spline affect terrain height and painted layers.
- Static meshes can be assigned to control points and spline segments.
- In UE 5.3, Nanite spline mesh support is experimental; Epic warns it can cause performance and culling issues.
Unreal Engine’s Landscape Spline system can be used to create editable curves for roads, paths, fences and other linear features that follow the terrain. The workflow described in Epic Games’ documentation covers everything from drawing a spline with control points to shaping the ground to follow it and distributing meshes along the path. The main Landscape Spline documentation does not specify a particular Unreal Engine version, so compare interface labels and features with the documentation for the version you’re using.
1. Add a spline to the terrain
In Landscape Mode, switch to the
Managetab and select theSplinetool. This tool lets you create spline control points on the terrain and segments connecting them.Use
Ctrl + Left-clickto place the first point. Repeat the same action to add points and extend the path. Alternatively, with a control point selected, useAlt + LMB Dragto create a new point and segment.Shape the curve by moving and rotating control points. When a segment is selected, its endpoint tangents are visible; dragging a tangent changes the segment’s curve. This lets you adjust the direction of a road or path to suit its route across the terrain.
To split a spline, use
Ctrl + Left-clickon a segment. To join two splines, select one and useCtrl + Left-clickon the other. UseDelto delete points.
If you need smoother transitions between control points, Use Auto Rotate Control Point adjusts a control point’s rotation after you release the cursor to maintain a smooth spline. Auto-Rotate Always Forward helps keep the direction consistently forward. These options affect the curve’s behavior, so check the result in the viewport as you work.
2. Make the spline modify the terrain
Go to the
Edit Layer Stacksection, create a new edit layer and selectSpline Edit Layer. Without this layer, Landscape splines do not affect the heightmap.Once the layer is enabled, spline changes are applied to the terrain. As described in the documentation, the terrain can rise or fall to follow the spline, with transitions on either side softened using cosine-blended falloff.
The
Half-WidthandSide Falloffproperties on control points determine the width of the spline’s effect and the transition area. Adjust them while observing how wide a band of terrain is affected by the route.The
Raise TerrainandLower Terrainoptions on a segment raise or lower the ground relative to the spline. Epic gives raised road sets as an example for the first option, and rivers and trenches for the second.
A spline can also paint a layer onto the terrain. The Layer Name on the relevant segment specifies the blendmask layer to paint; the painted area is affected by the control points’ width and falloff properties. So when combining terrain shaping with layer painting, check the spline width and side transitions as well.
3. Place meshes along the path
Select the Static Mesh you want to use in the
Content Browser, then click a spline control point on the Landscape.In the Level Editor’s
Detailspanel, go to theLandscape Splinesection and click theSegmentsbutton. This applies the mesh to all of the spline’s segments.If the
Spline Mesheslist in theLandscape Spline Meshessection is empty, add an entry using the plus icon. Assign the selected Static Mesh to the new entry’sMeshfield. To apply a mesh to only one control point, select that point and use theMeshfield in theDetailspanel.Properties such as
Center H,Offset,Scale to Width,Scale,Forward AxisandUp Axisdetermine how the mesh fits the path. For example,Scale to Widthscales the mesh to the spline’s width, whileOffsetaffects the mesh’s position relative to the spline. Check these properties if the mesh’s default orientation or scale isn’t suitable.
When multiple meshes are used on a spline, they may be applied in a random order; Random Seed controls that order. To avoid accidentally selecting all spline actors while editing, use Select Spline Points or Select Spline Segments for the relevant graph instead of Select All.
4. Don’t confuse Landscape splines with Blueprint splines
Landscape Splines and the Spline Component workflow in Blueprint are not the same. Epic’s Unreal Engine 4.27 documentation describes editing Blueprint spline points in the viewport, including adding, duplicating and deleting points. For a Spline Mesh Component, Allow Spline Editing Per Instance must be enabled in the Blueprint Editor; this component is limited to two points and does not allow new points to be added. When editing begins, Override Construction Script is set to True, preventing the changes from being overwritten. These details are from the UE 4.27 documentation and should not be confused with the version information for the Landscape Spline interface.
Version compatibility also matters at render time. The UE 5.2 release notes list Spline Mesh support for Path Tracer. Nanite spline meshes were introduced experimentally in UE 5.3. To enable this support, the 5.3 documentation specifies the following line in the settings file:
r.Nanite.AllowSplineMeshes=1Epic notes that in UE 5.3 this feature may negatively affect culling performance across Nanite, and that incorrect culling with extreme deformations is a known issue. Test the result and performance in your version before enabling it in a production scene.
Common mistakes
The terrain isn’t changing: You may have drawn a spline without adding a
Spline Edit Layer. Check the Edit Layer Stack.The mesh has the wrong orientation or scale: Review
Forward Axis,Up Axis,ScaleandScale to Width.The curve breaks or its direction becomes inconsistent: Adjust the control point tangents; try the auto-rotation options if needed.
Mistaking a Blueprint spline for a Landscape spline: The Blueprint Component instructions for UE 4.27 describe a different workflow; whether you can add points depends on the component type.
Assuming Nanite support is risk-free: UE 5.3 marks the feature as experimental and warns about performance.
Impact on architecture and visualization workflows
Architecture and visualization teams creating routes for roads, paths or fences on terrain can edit the spline to work on both the path and its relationship to the terrain. Because control points can be moved, route revisions can benefit from the spline’s non-destructive editing approach. Using Static Meshes along the path also makes it possible to apply repeated elements to the spline.
However, the source documentation does not provide specific hardware requirements, render times or licensing terms. The performance warning for UE 5.3 Nanite spline meshes means that the project version and scene performance should be part of production decisions. The need for an edit layer to deform terrain, mesh orientation and the distinct rules for Blueprint splines should also be kept in mind when handing files between team members.
Sources
3 sourcesSource texts are not republished; short quotes are marked, everything else is our own summary and commentary.
For architecture and visualization offices in Turkey, the main practical benefit of Landscape Spline is that it can manage terrain-following routes and repeated meshes along a path in an editable system. Revising control points can make workflows more flexible, particularly when project requirements change.
However, the documentation provides no information about specific hardware or licensing costs, so assumptions should not be made in these areas. UE 5.3 Nanite spline mesh support is experimental and may affect culling performance, so it should be tested in a production scene first. The Blueprint spline instructions are also for version 4.27, making it important to verify the interface in other versions.
Frequently asked questions
How does a Landscape Spline affect terrain in Unreal Engine?
To affect the terrain, a `Spline Edit Layer` must be added to the Edit Layer Stack. The spline can then raise or lower the ground based on its width and falloff properties.
How do you add a Static Mesh to a spline in Unreal Engine?
Select a Static Mesh in the Content Browser. After selecting a spline control point, use `Segments` in the `Landscape Spline` section of the Details panel, then assign the mesh in the `Spline Meshes` list.
Is Nanite spline mesh support in UE 5.3 ready for production?
Epic’s UE 5.3 release notes describe Nanite spline mesh support as experimental. The documentation warns about effects on culling performance and incorrect culling with extreme deformations.



