Latest news
D5 Render: sky, HDRI and weather settings – step-by-step guideChaos Vantage Scene States: Managing Day-Night and Material Variations from a Single SceneHow to enable realistic caustics in Corona Renderer and D5 Render: a guideArchitectural render videos with Runway Gen-4: a camera movement prompt guideSpeeding Up Presentation Prep with Enscape Visual Settings PresetsBuilding your own render workflow with Veras 5.3 NODES: a step-by-step guideHow to Generate Music for Architectural Presentation Videos with Lyria 3.5 Clip PreviewToonflow: open-source AI platform for short drama and video productionInstant NeRF: Training 3D Scenes from Photos in Minutes — Setup and StepsUsing Gaussian Splat in V-Ray: a step-by-step guide for Maya
Tips & GuidesCorona RendererD5 Render

How to enable realistic caustics in Corona Renderer and D5 Render: a guide

Corona Renderer's Fast Caustics Solver and D5 Render's material-based caustics system make it possible to achieve realistic light patterns on glass and water surfaces in architectural visualization.

Interior visual showing the caustics effect created by light passing through glass surfacesAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. In the Cinema 4D plugin for Corona, caustics is enabled from the Fast Caustics Solver section under the Performance Settings tab.
  2. The caustics effect must also be enabled separately inside Corona Material for refractive materials such as glass.
  3. In D5 Render, caustics only works with the Custom, Transparent and Water material templates and four basic light sources.
  4. According to Chaos, Corona calculates caustics using a hybrid method that combines reverse path tracing with automatic photon mapping, keeping the impact on render time limited.

Caustics — the bright patterns created by light passing through glass, water and other transparent or reflective surfaces — significantly enhance the photorealism of architectural visualizations. According to Chaos's official documentation and blog post, Corona Renderer calculates this effect using a hybrid method that combines reverse path tracing with automatic photon mapping. In D5 Render, caustics is controlled through material and light source settings. This guide explains the steps required to correctly enable caustics in both applications, based on the settings described in the official documentation.

Why are caustics difficult to calculate?

According to Chaos's blog post, caustics occur when light travels from a source, hits a specular surface — meaning it reflects or refracts — and then reaches a diffuse surface before arriving at the camera. Standard path tracing, which sends rays from the camera into the scene, easily finds direct small light sources through "light sampling," but this method does not work for caustics, which are indirect light sources. For this reason, glass has traditionally been either ignored in renders or approximated using a semi-realistic approach known as "hybrid" or "architectural" glass.

According to Chaos's explanation, Corona solves this problem with an optimized method that combines reverse path tracing with automatic photon mapping, eliminating the complex manual setup required by classic photon mapping. The company states that this method correctly calculates glass while limiting the impact on render time to roughly 50 percent.

How to enable caustics in Corona

According to Chaos's documentation, in Corona for Cinema 4D, caustics is enabled from the Fast Caustics Solver section under Render settings › Corona › Performance settings. This section includes the following options:

  • Enable: Produces physically accurate caustics but reduces render performance. Refraction-based caustics also requires separate enabling within the material.

  • Caustics from environment: Calculates caustics caused by the scene's environment light; does not affect caustics from the sun.

  • Caustics in volumes: Calculates caustics in volumetric materials.

  • Only in caustics pass: When enabled, caustics appears only in a separate multi-pass; when disabled, it also appears in the beauty pass and other passes.

  • Surface multiplier / Volume multiplier: Adjusts the intensity of caustics on surfaces and in volumes respectively via a multiplier value; according to the documentation, changing the default value of 1 may lead to inaccurate results (too dark or too bright).

  • Include/Exclude: Used to exclude specific objects from caustics or to show caustics only on them.

The documentation emphasizes that, in addition to this setting, caustics must also be separately enabled inside Corona Material (whether legacy or physical material) in order to render refractive caustics. Corona's hybrid approach is described generally in Chaos's blog post; therefore, while the underlying method applies to all versions of Corona, the interface steps described here are shown via the Cinema 4D plugin in the documentation.

SettingRecommended valueEffect
Surface multiplier1 (default)Changing it moves surface caustics away from realism
Volume multiplier1 (default)Changing it moves volume caustics away from realism
Only in caustics passOff (as needed)When on, caustics appears only in a separate pass

Setting up caustics in D5 Render

According to D5 Render's official documentation, achieving the caustics effect requires enabling the "Caustics" option simultaneously on both the material and the light source. Currently, only the Custom, Transparent and Water material templates support caustics:

  • Custom material only supports reflective caustics.

  • Transparent and Water materials support both reflective and refractive caustics.

On the light source side, the four basic light types (4 Basic Light) as well as Geo Sky and HDRI-Sun support the caustics effect. The light settings include Caustics Intensity (a multiplier for caustics brightness) and Softness (the degree of softening when the light source radius is greater than zero) parameters. According to the documentation, caustics can be active on a maximum of 64 light sources at the same time, and since the effect reduces render performance, it is recommended to use it only where actually needed.

What does this mean for architectural visualization?

In scenes with glass facades, water features, or outdoor pool areas, caustics noticeably increases the believability of a visual. However, both Corona and D5 Render documentation clearly state that this effect adds extra load to render time; therefore, on projects with tight deadlines, it's important to enable caustics only in necessary scenes. D5 Render's material restriction (only Custom, Transparent, Water) also requires existing scene materials to be set up to match these templates, otherwise the effect will not appear at all.

Common mistakes

  • Enabling only the Fast Caustics Solver and forgetting caustics inside Corona Material; in this case, refractive caustics will not appear.

  • Expecting caustics in D5 Render with a material template other than Transparent/Water.

  • Arbitrarily changing the Surface/Volume multiplier values from their default of 1, breaking physical accuracy.

  • Adding more caustics-enabled lights in D5 Render than the 64 light source limit allows.

Sources

3 sources
D
documentation.chaos.comdocumentation.chaos.com/space/CRC4D/124524407/Performance+Settings
Summary
B
blog.chaos.comblog.chaos.com/what-are-caustics-and-how-to-render-them-the-right-way
Summary
D
docs.d5render.comdocs.d5render.com/user-guide/material/how-to-achieve-caustics-effect
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For offices in Turkey, caustics is a detail that can noticeably elevate visual quality, especially in residential projects with pools, commercial buildings with glass facades, and presentations featuring interior water features. However, both the Corona and D5 documentation clearly state that this effect adds extra load to render time; therefore, instead of enabling it by default on every scene under a tight delivery schedule, it makes more sense to use caustics selectively in frames where its visual impact will be noticeable.

D5 Render's material template restriction (only Custom, Transparent, Water) can create a learning curve in practice; existing material libraries may need to be reorganized to match these templates. On the Corona side, it should not be forgotten that the settings need to be enabled separately both in Performance Settings and at the material level — otherwise the expected effect will not occur at all, resulting in wasted time.

Frequently asked questions

How do you enable caustics in Corona Renderer?

In Corona for Cinema 4D, the Fast Caustics Solver found in the Performance Settings section of the render settings window must be enabled; additionally, for refractive caustics on refractive materials like glass, the caustics option must also be enabled inside Corona Material.

Which materials support caustics in D5 Render?

According to D5 Render's documentation, only the Custom, Transparent and Water material templates support caustics; Custom provides only reflective caustics, while Transparent and Water provide both reflective and refractive caustics.

How much does caustics affect render time?

According to Chaos, Corona's hybrid method, which combines reverse path tracing with automatic photon mapping, limits the impact of caustics on render time to roughly 50 percent; D5 Render's documentation states that caustics generally increases the render performance load.

Comments and the forum are in Turkish.Join the discussion
+

Related news