In brief
- SketchUp’s Face Settings offer wireframe, hidden line, shaded, and textured display options.
- Edge Settings let you adjust profiles, dashed back edges, and line styles that create a hand-drawn effect.
- Scenes save the view, style, and tag visibility; you can assign a scene to a corresponding LayOut viewport.
- Ortho must be enabled to set a scale in LayOut; there is also an option to preserve the scale when resizing a viewport.
Official SketchUp and LayOut documentation describes a workflow for tailoring a model’s appearance to its purpose and bringing it into drawing sheets. SketchUp’s Face Settings and Edge Settings determine how surfaces and lines are presented, while scenes save different views. Trimble’s LayOut guide explains how to use these scenes on plan, section, elevation, and presentation sheets. SketchUp Help pages were updated on 29 September 2026; the LayOut guide is dated 15 March 2023. The sources do not specify a particular SketchUp version.
1. Decide what the model drawing is for
A plan sheet and a concept presentation do not necessarily need the same visual language. In SketchUp, Face Settings in the Styles panel control how faces appear, while Edge Settings control the look of edges. Considering these settings before creating scenes can help maintain a consistent appearance across sheets.
Face options are suited to different purposes. Wireframe Mode displays only lines; because faces are hidden, face-modifying tools such as Push/Pull cannot be used in this mode. Hidden Line Mode displays faces without shading or textures, making it suitable for black-and-white drawings. Shaded Mode uses basic shading, while Shaded Using Textures Mode combines shading with basic textures. Photoreal Materials displays assigned PBR texture maps; an Environment must be selected to see the full effect of these materials.
2. Set face and edge styles for the task
To adjust the model’s faces, choose an appropriate display option under Styles panel › Face Settings. Use Hidden Line for a drawing without materials or shading, Shaded when basic surface differentiation is needed, or Shaded Using Textures when textures should be visible.
Consider Back Edges to control lines hidden behind other parts of the model. Hidden lines appear dashed; enabling this setting disables the X-Ray face style. X-Ray makes faces transparent, helping you see, select, and snap to points and edges that would normally be behind surfaces. Faces do not cast shadows in X-Ray mode.
Turn on Profiles and set a thickness in pixels to emphasize the outer boundaries of major forms. If foreground lines need to be distinguished from background lines, enter a foreground line thickness with Depth Cue. These options can make line hierarchy more apparent.
Try Extension, Endpoints, or Jitter for a sketch-like look. Extension extends lines beyond their endpoints; Endpoints adds weight at the ends; Jitter redraws lines with slight shifts to create a hand-drawn feel. According to the documentation, Extension and Jitter do not affect inference behavior in the model.
When managing line color, note the differences between All Same, By Material, and By Axis. All Same displays edges in the selected color swatch but does not remove assigned edge colors. By Material uses the color of edges with materials assigned. By Axis displays the All Same color on edges that are not aligned with the axes; axis colors are not shown on hidden edges.
Transparency and shading also affect the appearance. Material Transparency turns overall material transparency on or off. For Transparency Quality, Faster provides quicker but lower-quality sorting, while Nicer is slower in exchange for a better appearance. When Ambient Occlusion is enabled, color, distance, intensity, and Distance Multiplier settings become available; these controls determine the quality of dynamic shading on edges and surfaces.
| Setting | Option | Effect |
|---|---|---|
| Transparency Quality | Faster | Processes transparency faster, at lower quality. |
| Transparency Quality | Nicer | Provides a better appearance, but processes more slowly. |
| Face Style | Hidden Line | Displays faces without shading or textures. |
| Face Style | Photoreal Materials | Displays assigned PBR texture maps; an Environment is required for the full effect. |
3. Prepare scenes before laying out sheets
The LayOut guide recommends keeping model work in SketchUp and sheet layout and annotations in LayOut. Create a scene in SketchUp for each drawing; a scene preserves the view, visible tags, and defined style. A typical drawing set can have separate scenes for plans, sections, and elevations. Tags can be used, for example, to show furniture in a plan view and hide it in a section.
Create section planes before scenes. The guide notes that section planes added later may also appear in earlier scenes, requiring those scenes to be revised. The documented workflow for a plan view is to select parallel projection from the Camera menu, switch to the top view from the standard views, and activate the relevant section plane. The guide describes a typical plan section as 4 ft above the floor; this measurement is given as stated in the source.
4. Scale viewports in LayOut
Once scenes are saved, insert the SketchUp model in LayOut via File › Insert. Choose a scene from the SketchUp Model menu in each viewport and set the drawing scale. Changing a viewport’s size can also change its scale; use Preserve Scale on Resize to prevent this. Ortho must be enabled to set the scale.
LayOut documents can be started from templates that include options such as standard page sizes and title blocks. Document settings can be changed via File › Document Setup; frequently used settings can be saved as a template using File › Save as template. Pages, layers, drawing names, and annotations are all part of the sheet layout. With a three-button mouse, the scroll wheel can be used to zoom, and the wheel button to pan around the page.
This workflow is useful for architecture and interior design teams that need to produce plans, sections, and elevations from the same model, as well as visualization studios that prepare model presentations alongside technical drawings. Since styles can be preserved on a scene-by-scene basis, different looks can be set up for different sheet purposes. The sources do not cover hardware requirements, current pricing, or licensing terms; teams should assess performance and access conditions in their own workflows.
Common mistakes
Adding section planes after saving scenes can require checking visibility and updating earlier scenes.
Resizing a viewport in LayOut without preserving its scale can change the drawing scale.
Assuming X-Ray and Back Edges can be used together: enabling Back Edges disables the X-Ray face style.
Selecting Photoreal Materials without choosing an Environment can prevent the full effects of PBR materials from appearing.
Sources
3 sourcesSource texts are not republished; short quotes are marked, everything else is our own summary and commentary.
For offices in Turkey, the most tangible benefit is being able to manage the model’s appearance and the drawing sheet in separate stages. Preparing scenes in advance can reduce rework when producing different plan, section, and presentation views from the same model. For items managed with tags, such as furniture, checking visibility in each scene can make sheets easier to read.
However, visual quality settings alone do not guarantee a faster workflow. Since the sources do not provide hardware requirements, pricing, or licensing terms, offices should test performance with their own models and separately verify the version they plan to use and the conditions for accessing it. The most common avoidable problems are adding sections after creating scenes and resizing a viewport without preserving its scale.
Frequently asked questions
What is Hidden Line view used for in SketchUp?
Hidden Line Mode displays faces without shading or textures. The official documentation describes it as suitable for black-and-white model presentations.
How can you preserve the drawing scale when enlarging a viewport in LayOut?
Check Preserve Scale on Resize in the SketchUp Model menu. Ortho must be enabled to set the scale.
Should section planes be added before creating scenes in SketchUp?
Yes. The LayOut guide notes that section planes added later may appear in earlier scenes, requiring those scenes to be revised.



