In brief
- Make2D creates flat curves for object edges and silhouettes in one or four views.
- ClippingSections can create planes that cut selected objects and save section views as Named Views.
- ClippingDrawings organizes output into layers; drawings update when a clipping plane is moved.
- Clipping drawings must be refreshed with the UpdateClippingDrawings command when cut objects or their properties change.
Rhino 8’s Make2D, ClippingSections, and ClippingDrawings commands can be used to create 2D views and section drawings from a 3D model. Make2D converts model edges and silhouettes into flat curves based on the selected view. In the section workflow, ClippingSections creates cutting planes, while ClippingDrawings uses those planes to generate 2D drawings from section and background geometry. The steps below explain which results are affected by the settings and when drawings need to be updated.
1. Choose the view type and projection
Run the Make2D command and select the objects to include in the drawing. Then choose the view and object visibility options. The command can create a drawing from a single view or an output with four views.
For a single view, the View option in the Projection section uses the currently active view. The default output location is determined by the active view, with the lower-left corner of the view placed at the World origin.
The CPlane option creates a drawing from the active viewport’s plan view and places the result on that viewport’s construction plane. If drawings created at different times need to align, you can use the Register with previous option. This option works only with View and CPlane projections.
For four views, First angle projection uses the European layout, while Third angle projection uses the US layout. Both create orthographic projections in world coordinates; they are not dependent on active viewport directions or construction plane directions. First angle views use World Top, World Front, and World left curves, while Third angle views use World Top, World Front, and World Right curves.
2. Configure line and layer output
Make2D options determine the properties of the lines and how they are grouped. If From input objects is selected under Object properties, the properties of the input objects are copied; if By output layers is selected, the output layers determine the properties. Maintain source layers is an option for preserving the source layer structure. You can set the main layer name for the output in the Layer name field; different curve types are categorized in sublayers.
Tangent edges draws the tangent edges of polysurface objects. Hidden lines creates hidden lines on Hidden layers; Scene silhouette displays object silhouettes with a heavier line weight. The Clipping plane intersections option adds clipping plane intersection lines. Viewport rectangle can be used for a rectangle that represents the viewport boundary in perspective views. Group output groups curves by their source objects.
3. Create section planes
Start the ClippingSections command and select the objects to cut. Pressing Enter creates sections through all objects. Then place one or more section planes in the viewports.
Set the direction before placing the planes. Under Dir, CPlane makes the section plane parallel to the current CPlane. X and Y define directions perpendicular to the current CPlane and parallel to the corresponding axis. Custom uses a direction defined by two points.
When CustomDepth is No, the clipping plane has infinite depth. When Yes is selected, the Depth setting becomes available; this value determines the thickness of the visible cut region. The documented default depth for ClippingSections is zero. A depth of zero produces thin section lines.
The Name option sets the prefix for section names; names are generated with increasing numbers. SaveToNamedView saves a Named View corresponding to the section view. If the section is placed in a perspective viewport, the saved view also uses perspective rather than parallel projection.
4. Create and update section drawings
The ClippingDrawings command extracts sections and background geometry from clipping planes and places the drawings on the World XY plane. You can select one or more clipping planes; the All option creates a drawing for every visible clipping plane. Choose a placement point. Pressing Enter places the base point of the current drawing at the World Top origin. Outputs are organized into layers, helping manage visibility in the modeling and layout spaces.
The table below summarizes the options described in the documentation and their effects:
| Setting | Options | Effect |
|---|---|---|
| ShowHatch | Yes / No | Controls hatching in sections when the object’s section style is set to display hatching. |
| ShowSolid | Yes / No | Determines whether planar surfaces are created from sections through solid objects. |
| AddBackground | Yes / No | Adds visible and hidden silhouette curves in front of the clipping plane to the projection. |
| Projection | Parallel / Perspective | Determines the camera projection type when AddBackground is enabled. |
| AddHidden | Yes / No | Draws hidden curves in the background. |
| AddSilhouette | Yes / No | Draws silhouette curves in the background. |
| ApplyToAll | Yes / No | Uses the current options for subsequent drawings as well. |
When a clipping plane is moved, its associated clipping drawings update interactively. However, if cut objects or their properties change, you must run the UpdateClippingDrawings command. If a clipping plane is deleted, its associated drawings and layers are also deleted. Clipping drawing blocks can be Exploded to separate drawing objects from input objects; this removes the connection.
5. Common mistakes
Assuming that the intersection line between two intersecting objects is created automatically in Make2D: Make2D does not generate this line. To create it, use the Intersect command to generate a curve, then add it to the objects to be included in Make2D.
Freely changing a perspective view while Register with previous is enabled: Changes to the view can affect the saved perspective view and cause registration to fail. In that case, a new view is saved; if alignment is required, keep this limitation in mind before changing the view.
Not refreshing a clipping drawing after model geometry or properties change: Moving the plane updates the drawing; geometry or property changes also require UpdateClippingDrawings.
Assuming section fill depends only on the clipping plane setting: The clipping plane’s section style is applied if the object’s properties are set to Section Style=By Clipping Plane. Also, section style colors can override print colors.
Impact on architecture and visualization workflows
These tools can help architecture and interior design teams streamline workflows when creating plan-like views, orthographic views, and section drawings from the same Rhino model. Choosing the view type and layer behavior at the outset in Make2D makes it easier to control where line types appear in the output. Saving sections as Named Views also makes it possible to reopen specific section views.
Before delivering drawings, check layer visibility, hidden-line and silhouette options, section depth, and output projection. The source documentation does not provide information about hardware requirements, licensing terms, or compatibility with other software, so no specific requirements on these topics should be assumed. It is especially important to verify that clipping drawings are up to date after geometry changes.
Sources
2 sourcesSource texts are not republished; short quotes are marked, everything else is our own summary and commentary.
Generating views and sections from the model in Rhino 8 is a practical way to reduce repetitive drawing work. For offices, the real time savings come from setting Make2D layer and line options consistently at the start of a project; otherwise, organizing the output can create additional work.
Remember that section drawings must be updated separately after geometry changes. Adding this step to the team’s delivery checklist can reduce the risk of sharing outdated drawings. Since the documentation does not provide information about hardware or licensing terms, office requirements for Rhino 8 should be checked separately before making decisions on these points.
Frequently asked questions
What types of drawings does Rhino 8 Make2D create?
Make2D creates flat curves for object edges and silhouettes in one or four views. Its projection options include View, CPlane, First angle, and Third angle.
How do you update a clipping section drawing in Rhino 8?
When a clipping plane is moved, its associated drawing updates interactively. When cut objects or their properties change, use the UpdateClippingDrawings command.
Can ClippingSections save a section view?
Yes. The SaveToNamedView option creates a Named View corresponding to the section view. A section placed in a perspective viewport saves a view with perspective projection.



