Latest news
Tips & GuidesUnreal EngineTake RecorderMAS

Unreal Engine Take Recorder Guide: Animation and Camera Recording

Unreal Engine’s Take Recorder lets you record actor and camera movement, as well as supported Live Link sessions, to Sequencer. This guide covers enabling the plugin, choosing sources, recording takes, and avoiding common issues.

Cinematic architectural visualization workspace with a camera and a modern interior sceneAI image
Representative image, generated with AI.Image: 3dsınıfı / FCA AI

In brief

  1. Unreal Engine must be restarted after enabling the Take Recorder plugin.
  2. Open the panel via Window › Cinematics › Take Recorder.
  3. A source needs both a recorder and a corresponding track that Sequencer can play back.
  4. You can add marked frames while recording and stop the recording with the button or the Esc key.

In Unreal Engine, Take Recorder lets you record animations, camera movement, and other supported sources for editing in Sequencer. The workflow described in Epic Games’ official documentation can be used for virtual production, as well as by teams iteratively developing character, scene, and camera movement. The documentation page doesn’t specify a particular Unreal Engine version, so the steps below are limited to the interface and features described in the source.

1. Enable the plugin and open the panel

  1. From the main menu, go to Edit › Plugins and find the Take Recorder plugin.

  2. Enable the plugin. Restart Unreal Engine for the change to take effect; Take Recorder won’t work while the plugin is disabled.

  3. If you’re recording a motion capture system or other live performances, enable the Live Link plugin in the same section. Enabling this plugin also requires a restart.

  4. Open the panel via Window › Cinematics › Take Recorder. If no sequence is open, Take Recorder creates a new, empty sequence. The new sequence’s time indicator matches Take Recorder’s time indicator.

To record, you need a project with a playable character and actors to capture. The official documentation also recommends a project created with the Third Person Template as an alternative.

2. Set take details and recording sources

The Slate area in the Take Recorder interface displays information about the next recording and its timing status. Here, you can set the take name and number, and adjust the marked frame, frame rate (fps), description, and recording speed. Editing the name and description before recording makes takes easier to identify later. Use Record to Sequence in the toolbar to choose the sequence where the take will be recorded. To clear the selection, use Clear Pending Take.

Define the assets to record in the Sources section. The +Source menu includes options such as actors in the scene, camera cuts, Level Sequences, Live Link, microphones, recently created actors, the player actor, and world/level assets. You can also drag an actor from the Outliner into the source panel. A source is enabled when the toggle beside it is on, and disabled when it’s off.

For a source to be recorded, it must have both a recorder and a corresponding track that Sequencer can play back. Properties that can be converted to keyframes can be recorded; actor properties that can’t be represented this way won’t be captured. Checking this requirement in advance reduces the risk of a recording not being created even when a source has been selected.

3. Configure actor and camera recordings

The Any Actor source records the selected actor’s world properties and components. Adding the actor via the Outliner is a practical way to link the correct scene object to the recording. You can leave the choice of whether the recording is Spawnable or Possessable to the project default, or select it in the source settings. Project Default follows the project setting; the other two options override this choice at the source level.

If an actor is attached to a parent object, consider the Record Parent Hierarchy setting. When this option is off, transforms for a possessable actor are recorded in local space, while transforms for a spawnable actor are recorded in world space. So when reviewing position and rotation after recording, check the actor hierarchy and recording type together.

When you add the Camera Cuts source, cameras active during the recording are captured. If the active camera changes, a new camera actor and camera cut section are created. This keeps camera information in the sequence when a performance includes transitions between different camera angles.

4. Start, mark, and review a recording

  1. Confirm that the sources to be recorded are enabled and that at least one valid source is available.

  2. Set the take name and number; adjust the fps, description, and recording speed if needed.

  3. Press the red record button in the Take Recorder panel. Alternatively, use the record button in Sequencer’s playback controls. The Sequencer button starts recording the selected actor into the current sequence and doesn’t require the Take Recorder window to be open.

  4. While recording, use Add Marked Frame to add a marker at that moment. Lowering the recording speed can help you follow and match movement more slowly, especially when recording into a busy sequence.

  5. Press the record button again or use the Esc key to stop recording and save the take.

You can open the latest recording with Review Last Recording and access saved takes through the Takes Browser. While reviewing a previous recording, Return takes you back to the pending take sequence. If a take number has already been used, the tool displays a warning; clicking it changes the number to the next available one.

Impact on architectural visualization and virtual production workflows

Take Recorder allows architectural visualization teams to record actor and camera movement directly from the scene and edit it in Sequencer. Artists looking to experiment with camera movement or animation variations and compare different shots as separate takes can benefit from this workflow. The documentation says it supports creating multiple takes and a nondestructive workflow, so previous recordings can be preserved while new iterations are made.

Live Link can be used in live performance or motion capture setups, but the relevant plugin must be enabled and the recording source configured correctly. Real-time recording performance depends on hardware and setup conditions. Taking a short test recording before production can help verify that the sources and recording speed are suitable for the project. Since the documentation doesn’t provide specific hardware requirements, licensing conditions, or performance figures, these should be evaluated separately for each project and setup.

Common mistakes

  • Not restarting Unreal Engine after enabling the Take Recorder plugin.

  • Assuming a selected source is ready to record; you also need to check the recorder and playable Sequencer track requirements.

  • Assuming the record button is disabled when there’s no valid source. According to the documentation, it’s replaced with an invalid-source icon.

  • Selecting a take number that’s already been used. The warning shows where the previous recording is located and can change the number when clicked.

  • Not accounting for the space in which transforms are recorded when Record Parent Hierarchy is off for actors attached to a parent object.

Sources

1 source
D
dev.epicgames.comdev.epicgames.com/documentation/en-us/unreal-engine/take-recorder-in-unreal-engine
Summary

Source texts are not republished; short quotes are marked, everything else is our own summary and commentary.

3dsınıfı’s take
3dEditor’s assessment

For architectural visualization offices in Turkey, Take Recorder’s practical value lies in its ability to capture camera and actor movement directly into a sequence and compare different takes. In projects that use motion capture or live performance in particular, naming recordings consistently and adding descriptions can help reduce repeated work within the team.

However, the sources don’t specify hardware requirements, licensing conditions, or performance measurements. Since real-time recording depends on the hardware and setup, testing before production is important. The plugin and Live Link activation steps, as well as source-track compatibility, should also be on the initial checklist.

Frequently asked questions

How do I open Unreal Engine Take Recorder?

Enable the Take Recorder plugin in `Edit › Plugins` and restart Unreal Engine. Then open the panel via `Window › Cinematics › Take Recorder`.

What sources can Take Recorder record?

The documentation lists actors, camera cuts, Level Sequences, Live Link sessions, microphones, the player actor, and world/level sources. A source needs both a recorder and a corresponding track that Sequencer can play back.

How do I stop a Take Recorder recording?

Press the record button again or press the `Esc` key. The current take is saved when recording stops.

Comments and the forum are in Turkish.Join the discussion
+

Related news